Sliding Miter Saw - Make definite Cuts
A miter saw (also called as mitre saw and less commonly miter box) is a mechanical tool used for development spoton crosscuts and miters in a workpiece. There are two types of miter saws commonly found. These are hand-operated miter saw and a motorized miter saw. The first miter saw ever made in the world was a hand-operated miter saw. It is a saw having replaceable blades suspended on rollers in a metal guide which allows development of spoton crosscuts and miter cuts.
These are more commonly used in photo framing, but have now been supplanted by its power operated counterpart. The hand-operated miter saw is also the sliding miter saw. The motorized miter saw which is operated on power is also called as chop saw or drop saw. It is a power operated tool that is used to make quick, accurate, crosscuts in a work piece. This power tool is commonly used in framing operations and cutting of molding.
Miter Saw Blades Slide
Most of these miter saws are transported with blade sizes fluctuating from eight to twelve inches. This saw works by pulling a circular saw blade down onto a work piece in a short controlled motion, the work piece being held against a fence. This fence provides an spoton cutting angle in the middle of the blade and the longest work piece edge. In a thorough position this angle is fixed at 90 degrees. The primary feature that distinguishes this saw from others is its miter index that allows the angle of the blade to be altered relative to the fence.
Check Price on - Miter Saw Blades Slide Products
Whereas most miter saws contribute a factory to make a one degree incremental change to the miter index, many also contribute stops that allow the miter index to be properly set to base angles of calm down like 15 degrees, 30 degrees or 45 degrees. Some salient features of the sliding miter saws are as under:
- A blend feature allows the angle of the cutting blade to be altered relative to the cutting plane. This also allows the saw to be used for bevel cutting. A saw with a blend feature is called as blend miter saw or Cms.
- A slide allows the cutting blade to be moved some inches along the cutting plane, which in turn allows the cutting blade to make cuts which are longer than the diameter of the blade. A slide which combines the features of slide and blend miter saw is called as sliding blend miter saw or Scms.
- A laser guide gives the exact indication of where the cut will be made in the work piece in the arrangement.
- A blade guard is a cover for the sharp teeth of the cutting blade. Most contemporary saws have a self retracting blade guard, which automatically retract when the blade is lowered onto a work piece and re-cover the blade when it is raised.
- A dust bag is directly associated to the saw, which helps to acquire the sawdust directly away from the work piece when cutting.
Sliding Miter Saw - Make definite Cuts
No comments:
Post a Comment