development Pvc Furniture - Measuring, Cutting and Gluing Techniques
Making indoor/outdoor furniture and other projects with Pvc pipe is a very rewarding hobby. You'll be surprised at how many beneficial and money-saving items you can craft. For example... Home furnishings, toys, yard 'n organery things, shop equipment, games and on and on.
But, before you begin, here are some techniques that will make working with this low-cost, versatile material quicker and much easier.
Miter Saw Blades Slide
Measuring and Cutting
Check Price on - Miter Saw Blades Slide Products
1. Always cut the longest pieces first. That way, you'll be able to use more of the pipe.
2. Mark the length to be cut with a pencil.
3. Cut with a appropriate Pvc pipe cutter. The easiest to use is a uncomplicated ratchet-style cutter available at most hardware stores.
4. Line up the pencil mark with the pipe cutter blade, then cut on the inside edge of your mark.
Option: You can also cut the pipe with a hack saw. To make a level cut, place the pipe into a miter box. Then wedge a piece of scrap wood in the middle of the pipe and the side of the miter box to brace it securely. Cut on the inside edge of your pencil mark.
Note: When cutting plastic pipe with power equipment, wear a permissible dust mask or respirator to protect against particulate dust.
Then, remove any burrs with a medium flat file or rough sandpaper. Use a rat-tail file for the inside of the pipe, if needed.
Gluing
When construction Pvc projects, sometimes in haste we glue fittings that end up facing the wrong direction. Of course, this leads to ruined fittings, delays and, essentially, having to start over. It happens and it's frustrating. So here's how I solved the problem.
1. After cutting the lengths of pipe, "dry-fit" sections of your task as you progress. Make sure the lengths are accurate and the fittings are facing the permissible way. Use a carpenter's quadrilateral to guide you, if need be.
Tip: If you find an inserted pipe stubborn to remove, attach a vice-grip on the pipe with the Pvc fitting clamped in a bench vice, then separate by twisting. Or, use two vice-grips.
2. When you're clear the section you're working on is accurate then, using a yellow marking pencil, draw a line an inch, or so, along the pipe up and over each fitting. This serves as an easy alignment guide. Now take the section apart and lay out the pipe and fittings to put in order for gluing.
3. Swab a light estimate of glue to both the fitting and pipe, insert the pipe into the fitting, twist slightly and line up the yellow markings. Pvc glue (also called cement) dries fast, so you'll have to be quick. Hold it together for a few seconds. Then wipe off any excess glue immediately with an old rag, which will also remove the yellow line. By the way, since these are not plumbing projects, you do not have to use Pvc primer.
Tip: The gluing policy I just mentioned is the permissible way to fasten pipe to fitting. However, that said, I apply glue to the inside the fitting only. Use your own judgment, but in 25+ years none of my Pvc projects have ever come apart. Applying glue to both parts is, to me, overkill and wastes glue.
I mentioned that I swab the inside of the fitting only. Why? Because when you insert the pipe most of the glue flows to the inside. If you swab the pipe instead, the glue would ooze outwards toward your hands. My way is neater and cleaner.
4. Normally, the pipe slides into the fittings easily. For those time when you're not clear if the pipe has seated against the fitting wall, fast and gently tap the opposite end of the pipe with a dead-blow hammer or wooden mallet.
5. Work in sections. For example, when construction a chair I assemble the left side first then the right side. Finally, I procure the connecting lengths of pipe to both sides.
6. If, when production a Pvc chair, you use sling material for the back and seat, be faithful not to glue one side of the task until after you've attached the material to the frame.
But what if you don't want to use Pvc glue? For some projects (example, doll furniture) applying one tiny spot of super glue to the inside of the fitting will do just fine. I don't advise it, however, for projects that will get heavy use.
Also, I've had good luck with polyurethane glues, which can give you abundance of time (up to 4 hours) to adjust your task before it cures. So far, the two projects for gardening I've tested have held up well. Again, you don't want to use it for heavy-use projects like swing-sets, chairs, and so on.
Mastering these uncomplicated techniques for working with Pvc pipe will ensure your Pvc furniture and other projects will turn out perfectly.
development Pvc Furniture - Measuring, Cutting and Gluing Techniques
Baby Hats 0-6 Months - Rainbow Colored Hearts Baby Hat - Flower Baby Hats - Baby Headbands Mens Hemp Clothing
No comments:
Post a Comment